Smart Home
It is a house that contains a set of sensors that measure everything that happens inside the house, such as the gas and smoke sensor, the temperature and humidity sensor, the light sensor, as well as the soil moisture sensor, in addition to a smart door that opens through artificial intelligence.
The smoke sensor is monitored in the event of a fire inside the house, where the protection system works like an alarm bell, as well as you are contacted via IFTTT and the Telegram application, as well as the temperature and humidity sensor, the LDR light sensor measures the intensity of light inside the house and through it turns on the house lighting if the weather is dark, either The soil moisture sensor measures the humidity in the plant, and if the plant needs water, it turns on the water pump, and all of the sensor readings are recorded within the PictoBlox program and sent to the adafruit website using IoT for recording and reading from anywhere in the world. As for the door that opens via artificial intelligence, a face print, and a Servomotor, a quarky robot is used to control all the sensors
Smart Transportation System
What we are doing to the planet is inexcusable.” : Due to the ever-growing population of India, statistics have shown that India has the widest range of traffic issues. Our solution is fool-proof. We will have a smart traffic signal, where the Bluetooth connected timer will be set to a default time of 30 seconds. There will be small booths next to ever signal and drones with a 360 degree view of the street. An AI car counting system will determine the times that the signal will open at.
delivery system
this project is creating a delivery system and I used Quarky to display what he thinks of the items that is been delivered is it healthy or not
San Bot
The Sanbot will be very beneficial in the future because it cleans hospitals, which will stop germs from entering the facility. As the Indian people have suffered more due to this new pandemic, we do not want hospitals to struggle with maintaining cleanliness while providing patient care because it is very difficult to multitask, and it does not make sense for people to visit hospitals and feel worse after getting treatment so we have developed San Bot that will clean the hospitals every 20 minutes.
The smart water valve
this project is about desertification problem and how to conserve as much water as possible by conscious water use, through the flow sensor that counts the amount of water that may pass through the water tube or hose and it gives an alarm in case it passes a specific programmed amount
Automated water quality monitoring system that facilitates the task of finding the pollution
I chose to make this project because
• Water is the world’s most important source of ecological and human
survival. In recent years, the water scarcity crisis has become a severe
issue, especially in the third world, including Iraq, where water
resources face a real threat. It has become one of the biggest
challenges that severely affects people’s health and environment. Not
only has there been a decline in water quantity, but the degeneration
of water quality has severely affected many rivers and lakes due to
water pollution, which is one of the main reasons that lead to this crisis.
3
Direct disposal of untreated sewage from rural and industrial regions to
water bodies and land is the primary cause of the pollution of fresh
water and reduces the resources for clean water.
The project aims to measure
1-The pH of the water
2-TDS water turbidity
3-The temperature of the water
By combining these three systems, we can evaluate the water purity. A
System should test for He pH of the water, TDS water turbidity and The
temperature of the water to ensure levels are safe.
The used instruments in this project
-Hardware components
1-Arduino UNO
2- Digital Temperature Sensor
3- pH Sensor
4- TDS Meter
5- Esp8266 WIFI module
-Software
1-Arduino IDE
2-PictoBlox
3-blynk.cloud: IoT software platform for electronics manufacturers
4
Smart street
A solution to the problems in the street, from solving the problem of congestion through a smart light, that removes congestion using sensors, and a solution to the problem of desertification by placing a smart sensor for the purpose of watering plants and also disposing of waste through a sensitive setting that senses if the garbage is full and sends a notification to the competent authority to remove it and rationalize electricity By placing a motion sensor that senses objects when moving in the street
Soil Moisture Sensor
Soil moisture sensor also known as “SMS” is a sensor that detects if the soil is wet or not. This sensor helps farmers to know how much water is needed for the plants. It uses Arduino which is an input/output board with a programmable integrated circuit. The output of the program demonstrates if moisture content is present in the soil.
GIBBOTS SMART CAR
PROJECT GIBBOTS – Made by Abdur Rehman Khawaja and Rayaan Danish, this car was made to save lives. From stopping at signals to stopping if anything is in front of them (10 cm or less). Our project is one of the most safe cars in lego. Our car also uses a touch sensor to make sure that the car is aware that a car has rear ended the smart car. The point of making this car was to make safer cars. Last year around 42000 people (in the united states) died just because of car crashes. And we wanted to solve it in lego, of course pieces of lego can’t do anything right, this thing can do a lot of things. If these things were built into most cars (they have it in some cars but not in most of them) this could save lives. It can also stop if a pedestrian is walking past so the pedestrian doesnt get hit. The EV3 software has been used for the robot programming and the pictoblox program is used to demonstrate the program.
CO Detector Project
Exploration of carbon monoxide gas in the atmosphere, which is the silent killer because it is colorless and odorless and is generated as a result of incomplete combustion in homes, factories and cars, as it leads to many health risks that may lead to death. This project is considered one of the important environmental solutions.
A Microbit chip was used, which is an electronic brain that works with artificial intelligence. A carbon monoxide (CO2) gas sensor (MQ 9) was used, and it was connected to the Microbit chip with fine wires. The electronic circuit was connected to the computer, and programming was done using the Python language via the Pictoblox application, where it is recognized the presence of gas, writing ((Danger) and a warning sound, and in the absence of Co gas, the writing is (Safe). The project was experimented with a burning candle and then extinguished. The presence of Co gas was detected, and the experiment was also done by placing the sensor with a burning candle inside a glass container, and when it was finished the candle is extinguished and toxic gases are generated. The presence of gas has been sensed and a warning sound has been issued
