Project Description: This design of mine aims to protect children when they are left alone at home, as it is no secret to many that parents suffer when they are forced to leave the house and leave their children alone. And here begins their adventures by playing with dangerous things such as electricity and fire. This is where the idea of designing a smart talking camera for baby monitors began.
Project Description:
The system was built using the Proteus program, and a simulation was carried out using this program. As shown in the figure below, the system consists of an Arduino UNO microcontroller and a relay module with two channels. The first is used to cut off the electricity 220 volts AC, and it is controlled through pin 7 Arduino, as for the second channel, through which the value of 24 volts DC is controlled to control the opening and closing of the cooking gas valve, and this channel is controlled through pin 8 in the Arduino.
In the beginning, the system was tested by building a simple program using Arduino IDE, and after making sure that the hardware components worked well as planned, PictoBlox was used to interface the artificial intelligence with the hardware components. The last program controls both electricity and cooking gas to protect children from electric shock as well as prevent burns or, God forbid, fire
